Tiandy 24 Port PoE Switch (TC-P3S027)

Tiandy 24 Port PoE Switch (TC-P3S027) is designed for reliable connectivity and efficient power distribution in CCTV surveillance systems, IP camera installations, offices and business networks. Featuring 24 Fast Ethernet PoE ports, two Gigabit Ethernet uplink ports and one Gigabit SFP fibre port, it provides flexible connectivity for multiple network devices.

With a 260W PoE power budget, the switch supports IEEE 802.3af/at standards, allowing compatible IP cameras, wireless access points and other PoE devices to receive power and data through a single Ethernet cable. Its intelligent DIP switch offers VLAN, Default and Extend modes, making it suitable for different network configurations. The Extend mode enables long-distance PoE transmission on ports 9–24, while built-in surge and ESD protection helps safeguard connected equipment. With a 10.8Gbps switching bandwidth, zero-configuration operation and convenient LED indicators, this PoE Ethernet switch provides a practical solution for CCTV and IP network installations.

. Hardware & Interfaces

• 24 × 10/100Mbps PoE Ethernet ports

• 2 × 1000Mbps Gigabit Ethernet uplink ports

• 1 × 1000Mbps SFP fibre optic port

• AC 100–240V power input

• Supports automatic 10/100Mbps Ethernet port adaptation

2. Network Performance

• Switching bandwidth: 10.8Gbps

• Packet forwarding rate: 8.03Mpps

• Packet buffer: 3Mbit

• MAC address table: 2K

• Transmission mode: Store and Forward

• Flow control: IEEE 802.3x for full duplex

• Flow control: Back Pressure for half duplex

• Zero-configuration operation for automatic device adaptation

3. PoE Features

• Supports IEEE 802.3af PoE (15.4W)

• Supports IEEE 802.3at PoE+ (30W)

• Maximum PoE power budget: 260W

• PoE output voltage: DC 52V

• PoE power supply pins: 1/2+ and 3/6-

• Supports PoE priority management

• Ports 9–24 have PoE priority enabled by default

• Extend mode supports long-distance PoE transmission

• Ports 9–24 automatically activate AI mode and force 10Mbps operation when Extend mode is enabled

4. Intelligent Switching Modes

• Three-position intelligent DIP switch

• Supports VLAN mode for network traffic isolation

• Default mode for standard network operation

• Extend mode for long-distance PoE transmission

• One-key switching between operating modes

5. Network Standards & Protocols

• IEEE 802.3 – Ethernet

• IEEE 802.3u – Fast Ethernet

• IEEE 802.3ab – Gigabit Ethernet

• IEEE 802.3x – Flow Control

• IEEE 802.3z – Gigabit Ethernet Fibre Optic

• IEEE 802.3af – Power over Ethernet

• IEEE 802.3at – Power over Ethernet Plus

6. Network Transmission Media

Ethernet Cable

• 10BASE-T: Cat 3/4/5 UTP, up to 100 metres

• 100BASE-TX: Cat 5 or higher UTP, up to 100 metres

• 1000BASE-TX: Cat 5 or higher UTP/STP, up to 100 metres

Optical Fibre

• Multimode fibre: 50/125, 62.5/125 and 100/140μm

• Single-mode fibre: 8/125, 8.7/125, 9/125 and 10/125μm

7. Protection & Security

• Port lightning surge protection

• Common-mode surge protection: 4KV

• Differential-mode surge protection: 2KV

• Electrostatic discharge (ESD) protection:

  • Air discharge: 8KV

  • Contact discharge: 6KV

• Industrial EMC protection: EN61000-4-2 (ESD)

• Surge protection: EN61000-4-5

• Protection level: Level B

8. LED Indicators

• PWR: Power status indicator

• Mode: DIP switch mode indicator

• Green LED: Link and data activity

• POE Max: PoE power status display

• PWR ON: Device powered on

• PWR OFF: Device powered off

• Dual-colour LED selection:

  • Green: Link and data activity

  • Yellow: PoE status

9. Power Specifications

• Input voltage: AC 100–240V

• Input frequency: 50–60Hz

• Power supply output: 52V / 5.38A

• Maximum non-PoE board power consumption: 7W

• Maximum PoE power budget: 260W

10. Environmental Specifications

• Operating temperature: -10°C to 50°C

• Storage temperature: -40°C to 70°C

• Operating humidity: 10%–90%, non-condensing

• Storage humidity: 5%–95%, non-condensing

11. Physical Specifications

• Product dimensions: 320 × 207 × 45mm

• Package dimensions: 370 × 290 × 85mm

• Net weight: 1.79kg

• Gross weight: 2.32kg

12. Packaging Information

• Carton dimensions: 445 × 310 × 390mm

• Packing quantity: 5 units per carton

• Carton weight: 12.6kg

  For detailed specification about this product: Click here
  For more Tiandy products, click on our link: Click here